Hydraulic cylinders are used in a wide range of applications such as oil drilling equipment, construction vehicles and manufacturing machines. Seal failure is one of the primitive causes of failure in hydraulic cylinders, possibly leading to fluid spill, unscheduled maintenance, reduced availability and thus leading to lower productivity. Regular visual inspection of seals without affecting the productivity is difficult as the seals are placed internally in the hydraulic cylinder requiring disassembly of the piston. Therefore, condition monitoring is required to assess the current health of the seals. There have been successful attempts made in literature for the assessment of seal quality using acoustic emission-based condition monitoring. However, there have been very few studies performed to diagnose the seal failure under varying speed and pressure parameters. Therefore, this study aims at increasing the understanding of seal failure under varying speed and pressure conditions through correlation with the acoustic emission signal. Experiments were performed on a hydraulic test rig using unworn, semi-worn and worn piston rod seals. For each seal wear condition, experiments were performed for five strokes at pressure conditions of 10, 20, 30 and 40 bar and speeds of 50 mm/s and 100 mm/s. Continuous acoustic emission data were acquired during all the tests. The acoustic emission signal of each piston rod stroke was analyzed using different acoustic emission features such as power spectral density, root mean square, peak, mean frequency, median frequency and band power. From the acoustic emission analysis, by using power spectral density, mean frequency and median frequency feature it is possible to identify and segregate unworn seal, leakage due to semi-worn seal and leakage due to worn seal in the test rig. The acoustic emission-based condition monitoring methodology developed in this study lays a strong foundation for further research to develop real-time monitoring of the piston rod seal in hydraulic cylinders that are used in the offshore industry.
How to Cite
Hydraulic cylinder;, Piston rod seal;, Acoustic emission;, Power Spectral Density
The Prognostic and Health Management Society advocates open-access to scientific data and uses a Creative Commons license for publishing and distributing any papers. A Creative Commons license does not relinquish the author’s copyright; rather it allows them to share some of their rights with any member of the public under certain conditions whilst enjoying full legal protection. By submitting an article to the International Conference of the Prognostics and Health Management Society, the authors agree to be bound by the associated terms and conditions including the following:
As the author, you retain the copyright to your Work. By submitting your Work, you are granting anybody the right to copy, distribute and transmit your Work and to adapt your Work with proper attribution under the terms of the Creative Commons Attribution 3.0 United States license. You assign rights to the Prognostics and Health Management Society to publish and disseminate your Work through electronic and print media if it is accepted for publication. A license note citing the Creative Commons Attribution 3.0 United States License as shown below needs to be placed in the footnote on the first page of the article.
First Author et al. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 United States License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.