Commercial vehicles need to use PHM because the drivers cannot earn money during that period when a breakdown occurs. However, PHM technology has been actively applied in aviation and military, but it is also true that it has never been properly applied due to various limitations in automobile industry. In this study, PHM methodology suitable for commercial vehicle is constructed.
In the first step, the type, number, and position of the sensors are selected by applying the optimization technique so that the failure mode can be detected with considering cost reduction. Second, in case of a single vehicle such as aviation or military, PHM could be applied by using only data acquisition. However, in the case of commercial vehicles with several derivative cars, a hybrid model that considers the analytical model and data acquisition was applied to construct a diagnosis and prognostic model. Lastly, until now data driven approach was a way to check the status with the data obtained from the sensor and to report the remaining useful life when it continued. In advanced, in the vehicle, a dynamic model should be used to take into account external environment. And the SOFT SENSOR methodology that can catch the state of a specific weak point by using the detailed analysis model of NVH, thermal, and strength has been constructed.
How to Cite
commercial vehicle, motor, failure mode, PCA, FFT, feature extract, diagnosis, prognosis, RUL
The Prognostic and Health Management Society advocates open-access to scientific data and uses a Creative Commons license for publishing and distributing any papers. A Creative Commons license does not relinquish the author’s copyright; rather it allows them to share some of their rights with any member of the public under certain conditions whilst enjoying full legal protection. By submitting an article to the International Conference of the Prognostics and Health Management Society, the authors agree to be bound by the associated terms and conditions including the following:
As the author, you retain the copyright to your Work. By submitting your Work, you are granting anybody the right to copy, distribute and transmit your Work and to adapt your Work with proper attribution under the terms of the Creative Commons Attribution 3.0 United States license. You assign rights to the Prognostics and Health Management Society to publish and disseminate your Work through electronic and print media if it is accepted for publication. A license note citing the Creative Commons Attribution 3.0 United States License as shown below needs to be placed in the footnote on the first page of the article.
First Author et al. This is an open-access article distributed under the terms of the Creative Commons Attribution 3.0 United States License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.